Pilot-RC Matrix 2.2m (87″)

Pre-order are now available for Pilot-RC 2.2m Matrix Sport Jet

Scheme #02 - Orange/Yellow/Blue

Wingspan:78.7″ (2,000mm) Length:87.6″ (2,225mm) Wing area: – –Weight:21.9lbs (9.94kg) with Xicoy X120 turbine and fuel bag, standard tail pipe

3 Configuration are available for Pre-order. Please contact us for Pre-order info.

ARF+: The aircraft is equipped with a fuel tank and an air trap, a normal tailpipe (not a Vector tailpipe), a light version of electric retractable landing gear with brakes, and all the necessary hardware.

Turbine Ready: It includes a fuel tank and an air trap, a normal tailpipe, a light version of electric retractable landing gear with brakes, servos, and hardware. These items are preinstalled at the factory. Wing bags and fuselage bags are not included.

Turbine Ready Pro: A fuel tank and air trap, a vector tailpipe, a light version electric retract gear with brake, servos, and hardware are pre-installed at the factory. It also includes a wing bag and a fuselage bag.



After many successful with Predator Jet we decided to develop NEW sportjet for new era. The Pilot-RC Matrix is an innovative approach to a new sport jet/ 3Djet. Great capabilities had to be combined between sport jet and unbeatable 3D performance. everything aerodynamic we tested and learned from Predator and develop together with one of the best pilot in the world for Matrix performance so we can say this is best ever sport jet with ultimate flying characteristics for precise aerobatics and 3D aerobatics at the same time.
The Matrix all feature and shape of airframe this from one of the best designer Mirco Pecorari from Aircraftstudiodesign, a little like the charismatic hypercars style.


Model: Matrix 2.2
Wingspan: 78.7″ (2,000mm)
Length: 87.6″ (2,225mm)
Wing area:
Weight: 21.9lbs (9.94kg)


Matrix 01 blue white photos


Matrix 02 orange yellow photos




Matix 2.2m installation photos





  • Extremely lightweight full composite construction especially designed for outstanding sport flight with 3D performance
  • Painted outside the mold so no seam lines
  • Ultra light weight landing gear,  the 2.2m predator sport jet V2 landing gear can use to the Matrix too. 
  • Specially designed easy access to turbine for speedy installation
  • Field setup can be done in seconds, thanks to the quick releases on the wings without the need for any tools.
  •  the single elevator clamp from the top, only a few turns to tight/loose the bolt then you can install/take out the stabilizer. 
  • Removable wing and elevator for easy transport
  • The equipment installation board make the electronic items with very clear installation. Most of the wire can be hidened. 
  • pre-install tube for the stab/rudder extension wire, easy to install. 
  • Option with vector tail pipe for 3D flight. 


  • Complete air frame (including carbon wing-tubes and preinstalled and painted fiberglass control horns)
  • Servo extension leads
  • Vector thrust pipe
  • 3.800ml fuel tank (optional upgrade to fuel bag)
  • 250ml UAT tank
  • Pre-prepared pushrods with ball links
  • Servo connector brackets

*Also available: Turbine Ready version.  Includes all the above, plus x10 Pilot-RC servos, all pre-installed and with free wing bags.  Just add your own turbine of choice.

*Also available: full retract combo. Includes Pilot-RC electric retracts and electric brakes, specific for this model.


Turbine size:

  • 100-140N for normal sport flying
  • 160-180N for 3D vector flight – Avoid high speed high G flying

Servos: Total x10 (x5 standard size + x5 medium size)

x3 standard size high torque
x2 for flaps (minimum 40kg)
x1 for rudder (minimum 40kg)

x7 medium size servo  (size: 35x15x30mm)
x2 for ailerons (minimum 16kg)
x2 for elevators (minimum 16kg)
x1 for vector elevator (minimum 16kg), this is option
x1 for vector rudder (minimum 16kg), this is option
x1 for steering (minimum 10kg)

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.


Aileron: 18mm, Rudder: 50mm, Elevator: 26mm.
Flap: 25mm for take off and 95mm for landing.
The CG is 253mm back from the leading edge of the wing at the fuselage
Measured with empty main tank, full UAT, landing gear down.


USA Ground Shipping Cost: $ 350.00 to Business address.  Add $100 for residential address.