Pilot-RC PREDATOR 2.2m (90")

$2,149.00

A whole new line of sport jet, designed from the ground up with performance in mind. Capable of both high and low speed flying and maneuvers and even options for converting to full 3D no maneuver is out of reach for the Predator.

Select one of the several aggressive colour schemes and really stand out from the crowd at your next event.

SPECIFICATIONS:

Model:	Predator 2.2
Wingspan:	81.7″ (2,076mm)
Length:	90″ (2,286mm)
Wing area:	1,292 “² (8,332 cm²)
Weight:	23.7lbs (10.8kg)

Videos:

Recommended to purchase: Pilot-RC Multiplex X4 Multi-Wire Connectors x 2 https://globaljet.club/collections/pilot-rc/products/pilot-rc-multiplex-x2-multi-wire-connectors?variant=35697634115747

Terms & Conditions

A 50% deposit is required to place an order. Once an order is placed, it may not be cancelled. • Balance in full is due upon completion.

Optional: Tail Pipe w/ Vector Thrust +$199.00, Custom Scheme +$349.00, Spare electric retract w/ brake $699.00

FEATURES:

Full composite construction, lightweight and strong
Two piece wing and two piece stabiliser all for easy transport
Painted outside the mold so no seam lines
Pre-installed tubes for servo extension leads
Optional 3D vector thrust pipe

INCLUDED HARDWARE:

Complete air frame (including aluminium wing-tubes and fibreglass control horns)
Pilot-RC electric retracts and electric brakes
Servo extension leads
Dual wall tail pipe (105mm diameter – for 80-300N turbines)
All in one fuel tank. 4,600ml Fuel tank + 240ml UAT
Pre-prepared pushrods with ball links

2.2m Predator Jet With Kelvar Fuel Tank And Air Trap, Tail Pipe, Electric Retract Gear With Brake, And Hardware

Full Composite Airframe And External Paint. With 4.6L Kelvar Fuel Tank And 240ml Air Trap, Electric Retract Gear With ABS Brake.

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

REQUIRED HARDWARE:

Turbine size:

80-160N for normal sport flying
180-260N for 3D vector flight – Avoid high speed high G flying

Servos: 8 high torque (minimum 20kg) // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering

PILOT-RC RECOMMENDED HARDWARE:

Servos: Pilot-Rc PY20AL (20Kg – 0,15s at 6v)or
Servos: Pilot-Rc PW20AH (22Kg – 0,12s at 6v)
Servo arms: Pilot-Rc 1,2″ Aluminium arms (included with Pilot-Rc servos)

BUILD MANUAL:

Build Manual

Aileron: 17mm, Rudder: 25mm, Elevator: 13mm.
Flap: 46mm for take off and 78mm for landing.
The CG is 275-283mm from the front leading edge on the root of the wing