Pilot-RC FC1 3D 3.0M

$4,799.00

ARF:

Airframe with UAT, Fuel Tank, Vector thrust pipe,Fuel DOT,Fuel tank vent,Servo extension wrie,Hardware,W/O Gear.

ARF PRO:

Airframe with UAT, Fuel Tank, Vector thrust pipe,Fuel DOT,Fuel tank vent,Servo extension wrie,Hardware,and Electric retract gear with brake.

PNP(TURBINE READY):

Airframe with UAT, Fuel Tank, Vector thrust pipe,Fuel DOT,Fuel tank vent,Servo extension wrie,Hardware,and Electric retract gear with brake,All servos, smoke system with smoke pump and tank,Wing bag.

Pilot-RC is very proud to announce a new collaboration with the undisputed pioneers of 3D jet flying and designers of that very first 3D J10, Ralph and Enrico from Elster Jet.

This new collaboration has led to Pilot-RC to produce their latest design, the FC1.

Designed to be both precise and highly capable in normal aerobatics and also extremely agile and light for 3D flying. Elster’s background in 3D jet flying has led to a number of innovative solutions that assure a light, strong and extremely capable and fun new aircraft to fly.

SPECIFICATIONS:

Model:	FC1
Wingspan:	74.8″ (1,900mm)
Length:	120″ (3,055mm)
Wing area:	1,734″2 (11,190cm2)
Weight:	31.0lbs (14.1kg) with JetCat P220Rxi turbine and full UAT

VIDEO:

GALLERY:

FEATURES:

German design, by Ralph and Enrico from Elster Jet, designers of the first J10’s
Extremely lightweight full composite construction especially designed for outstanding 3D performance
Painted outside the mold so no seam lines
Ultra strong and light weight landing gear mounts, with factory installed blind nuts so mounting is just plug and play
Split fuselage design is joined with 5 screws, with only batteries and nose gear installed in the front section, meaning very easy connections and quick assembly at the field
Specially designed easy access to turbine for speedy installation
Wings and elevator are secured from the top
Removable wing and elevator for easy transport

INCLUDED HARDWARE:

Complete air frame (including carbon wing-tubes and preinstalled and painted fibreglass control horns)
Servo extension leads
Vector thrust pipe
4.500ml fuel tank
250ml UAT tank
Pre-prepared pushrods with ball links

Also available: Full retract combo. Includes Pilot-RC electric retracts and electric brakes, specific for this model.

Also available: Turbine Ready version. Includes all the above, plus x10 Pilot-RC servos, all pre-installed. Just add your own turbine of choice.

REQUIRED HARDWARE:

Turbine size:

140-190N for normal sport flying
200-260N for 3D vector flight – Avoid high speed, high G flying

Servos: Total x10 (x9 standard size + x1 medium size)

x9 standard size high torque
x2 for ailerons (minimum 35kg)
x2 for flaps (minimum 20kg)
x1 for vector elevator (minimum 20kg)
x1 for vector rudder (minimum 20kg)
x2 for elevators (minimum 20kg)
x1 for rudder (minimum 20kg)

x1 medium size servo for steering (size: 35x15x30mm)

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

PILOT-RC RECOMMENDED HARDWARE:

Servos: Pilot-Rc PW38AH for elevator/rudder/flap
Servos: Pilot-Rc PW27AH for aileron and vector
Servos: Pilot-Rc PY10AH for steering
Servo arms: Pilot-Rc 1.6″, 1,2″ and 0,8″ Aluminium arms (included with Pilot-Rc servos)

PILOT-RC RECOMMENDED ACCESSORIES:

COLOUR SCHEMES AVAILABLE:

Scheme 01 – Fluorescent Red:

Scheme 02 – Fluorescent Orange:

Scheme 03 – Fluorescent Green:

Scheme 04 – Fluorescent Yellow:

CONTROL THROWS:

Flap: Maximum available
Aileron: 45mm up / 30mm down
Rudder: 50mm left / 50mm right
Elevator: 70mm up / 70mm down (measured from the front)

CENTER OF GRAVITY:

18cm forward of the front of the wingtube
Once comfortable with the model and gyro turned on, slowly take back to 17cm

Measured with empty main tank, full UAT, landing gear down.

MIXES:

Even though this model can easily be flown as a conventional setup, the configuration used by Elster Jet for 3D flying is as follows:

Roll axis: Uses ailerons for roll and only 10% added Taileron movement

Full Flap: Uses approximately 2mm up elevator (measured from the front)

VECTOR AND GYRO:

Elster Jet recommend the use of the gyro systems by Powerbox-Systems. These offer two banks, each with individually programmable settings.

FUNCTION	NORMAL FLYING	3D FLYING
Aileron	Heading Hold 15%	Normal Gain 40%
Elevator	Normal Gain 15%	Normal Gain 45%
Vector Elevator	Off	Normal Gain 90%
Vector Rudder	Off	Normal Gain 90%

These gains are approximate and WILL vary in your model, depending on your chosen servo’s speed, length of servo arm and other factors.

FULL BUILD MANUAL:

$300.00 Truck Freight ( 48 states )

Lead time up to 14 to 16 weeks

Terms & Conditions

A 50% deposit is required to place an order. Once an order is placed, it may not be cancelled. • Balance in full is due upon completion.

Please contact us to place your order

Globaljetclub@gmail.com

Colecciones: Pilot-RC

Categoría: fc-1, FC1, Pilot-RC, Turbine Jet