BASIC SETUP:

Control throws:

Aileron: 10mm up / 10mm down – 40% Expo
Measured from the wingtip

Rudder: 35mm left / 35mm right – 50% Expo

Elevator: 40mm up / 40mm down – 45% Expo
Measured from the front of the leading edge of the elevator.

The CG is 148mm from the front leading edge on the root of the wing (Factory Settings)

Global Jet Settings 

VIDEO:

GALLERY:

*Please note that the production version comes with a clear canopy.

FEATURES:

• Full composite construction, lightweight and strong 
• Two piece wing and two piece full flying stabiliser, both fully removeable
• Painted outside the mold so no seam lines
• Easily detachable ventral fins, helps in place with just two screws

INCLUDED HARDWARE:

• Complete air frame (including fibreglass control horns)
• Carbon fibre wing-tubes
• Servo extension leads
• Fixed Dual wall thrust pipe (for 60-100N turbines)
• Fuel tank (2000ml) and UAT (250ml)
• Pre-prepared pushrods with ball links
• Pre-glued control horns

OPTIONAL EXTRAS:

• Pilot-RC electric landing gear and brake set

REQUIRED HARDWARE:

Turbine: 60-100N 

Servos: x9

x5 middle size servo, 35 x 15 x 30mm (minimum 16kg) // Uses x1 per aileron, x1 per elevator, x1 on rudder

x4 middle size servo, 35 x 15 x 30mm (minimum 10kg) // Uses x3 for gear doors and x1 for steering

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

---

PILOT-RC RECOMMENDED HARDWARE:

• Servos: Pilot-Rc PW16AH (16Kg – 0,057s at 8,4v) 
• Servos: Pilot-Rc PW10AH (13Kg – 0,19s at 7,4v) 

---

COLOUR SCHEMES AVAILABLE:

Colour scheme 02 : 

Colour scheme 03 : 

Colour scheme 04 : 

Colour scheme 05 : 

---