Global Jet Club


Your Cart is Empty

Pilot RC F86D 2.2m (85") Turbine Ready PRO


  • Full scale detail with rivets panel lines, simulated hatches, etc…
  • Full composite construction, lightweight and strong 
  • Two piece wing and two piece full flying stabiliser, all for easy transport
  • Painted outside the mold so no seam lines
  • Fully hidden linkages, no horn, servo arm, ball links or pushrods exposed
  • Screwless detachabe nose / radar cover.


  • Complete air frame (including aluminium wing-tubes and fibreglass control horns)
  • Servo extension leads
  • Dual wall tail pipe (for 100-160N turbines)
  • Kevlar fuel tank (4200ml) and UAT (250ml)
  • Pre-prepared pushrods with ball links
  • Pre-glued control horns


  • Pilot-RC electric landing gear and brake set
  • Wing drop tank
  • Smoke system (includes kevlar tank, smoke pump, injection pipe and fuel tubing)
  • Speed brake (requires two additional servos)
  • Scale cockpit (minus pilot)
  • Wing bags


Landing gear combo.  Includes Pilot-RC F86D kit, gear door installed, and Pilot-RC electric landing gear and brakes set. 
Requires servos and turbine of choice

Turbine Ready – Sport-scale version.  Includes all the above, plus x10 Pilot-RC servos and 4in1 connectors for aileron/flap/brake/retract, all pre-installed. 
Requires your own turbine of choice.

Turbine Ready – Pro Scale version. Includes all the same as the standard Turbine Ready version, plus all the Optional Extras preinstalled. This includes Wing drop tank, smoke system, speed brake with servos, scale cockpit and wing bags, all preinstalled.
Requires your own turbine of choice


Turbine: 100-160N 

Servos: (x13 + 2 optional)

x7 super high torque (minimum 35kg) // Uses x1 per flap, x1 per elevator, x1 on rudder

x2 high torque (minimum 20kg) // Uses x1 per aileron

x4 middle size servo, 35 x 15 x 30mm // Uses x3 for gear doors and x1 for steering

+2 super high torque (minimum 35kg) if installing Speed Brake

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.


  • Servos: Pilot-Rc PW38AH (38Kg – 0,129s at 8,4v) 
  • Servos: Pilot-Rc PW20AH (22Kg – 0,12s at 8,4v) 
  • Servo arms: Pilot-Rc 1,2″ Aluminium arms (included with Pilot-Rc servos)


Control throws:

Aileron: 15mm – Rudder: 23mm

Elevator: 45mm up / 60mm down
Measured from the front of the leading edge of the elevator.

Take-off Flap: 30mm
Landing Flap: 75mm

Speed brake 1: 100mm
Speed brake 2: 190mm
Measured from the back of the speed brake plate. 

The CG is 270mm from the front leading edge on the root of the wing


Coming soon

2.2m F86D Jet TR PRO version preinstalled the servos, tail pipe, UAT, Kevlar fuel tank, fuel dot, fuel tank vent, servo extension wire, Gear door and Electric retract gear. preinstall speed brake(include operating servo), wing drop tank, smoke system. With Cockpit Set and wing bag

Electric retract gear with brake, 2pcs 20kg+ 5pcs 35/38kg + 4pc 10kg servos, 4in1 connector for wing, preinstall the above items in factory