Your Cart is Empty
Pilot-RC is very proud to announce a new collaboration with the undisputed pioneers of 3D jet flying and designers of that very first 3D J10, Ralph and Enrico from Elster Jet.
This new collaboration has led to Pilot-RC to produce their latest design, the FC1.
Designed to be both precise and highly capable in normal aerobatics and also extremely agile and light for 3D flying. Elster’s background in 3D jet flying has led to a number of innovative solutions that assure a light, strong and extremely capable and fun new aircraft to fly.
| Model: | FC1 |
| Wingspan: | 74.8″ (1,900mm) |
| Length: | 120″ (3,055mm) |
| Wing area: | 1,734″2 (11,190cm2) |
| Weight: | 31.0lbs (14.1kg) with JetCat P220Rxi turbine and full UAT |
Also available: Full retract combo. Includes Pilot-RC electric retracts and electric brakes, specific for this model.
Also available: Turbine Ready version. Includes all the above, plus x10 Pilot-RC servos, all pre-installed. Just add your own turbine of choice.
Turbine size:
Servos: Total x10 (x9 standard size + x1 medium size)
x9 standard size high torque
x2 for ailerons (minimum 35kg)
x2 for flaps (minimum 20kg)
x1 for vector elevator (minimum 20kg)
x1 for vector rudder (minimum 20kg)
x2 for elevators (minimum 20kg)
x1 for rudder (minimum 20kg)
x1 medium size servo for steering (size: 35x15x30mm)
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Scheme 01 – Fluorescent Red:
Scheme 02 – Fluorescent Orange:
Scheme 03 – Fluorescent Green:
Scheme 04 – Fluorescent Yellow:
Scheme 05 – Star:
18cm forward of the front of the wingtube
Once comfortable with the model and gyro turned on, slowly take back to 17cm
Measured with empty main tank, full UAT, landing gear down.
Even though this model can easily be flown as a conventional setup, the configuration used by Elster Jet for 3D flying is as follows:
Roll axis: Uses ailerons for roll and only 10% added Taileron movement
Full Flap: Uses approximately 2mm up elevator (measured from the front)
Elster Jet recommend the use of the gyro systems by Powerbox-Systems. These offer two banks, each with individually programmable settings.
| FUNCTION | NORMAL FLYING | 3D FLYING |
| Aileron | Heading Hold 15% | Normal Gain 40% |
| Elevator | Normal Gain 15% | Normal Gain 45% |
| Vector Elevator | Off | Normal Gain 90% |
| Vector Rudder | Off | Normal Gain 90% |
COMING SOON
$300.00 Truck Freight ( 48 states )
Lead time up to 14 to 16 weeks
Terms & Conditions
A 50% deposit is required to place an order. Once an order is placed, it may not be cancelled. • Balance in full is due upon completion.
Please contact us to place your order
Mike Lin Globaljetclub@gmail.com
Carrie Lau CarrieLau.Jet@gmail.com
Ralph Salgado Ralph@ralphsalgado.com